Ready to master the iconic hogtie? In our next bondage lesson, THE PUPPETEER teaches you how to create the ultimate symbol of vulnerable submission. This step-by-step guide shows you how to bind arms to legs, with options for total immobility or just enough wiggle room to be deliciously frustrating. Total control is just a knot away.
Together with THE PUPPETEER we present you some Basic Bondage Know-How. There are many ways to tie someone up, and the easiest among them is probably just with rope. However, when it comes to knots, most lack basic knowledge about them. That’s why we asked one of the greatest bondage experts we know for help. And he’s gonna teach you how it’s done.
Video Tutorial
When watching an abduction movie, you’re almost guaranteed to see it at some point sooner or later. The hogtie binds together arms and legs and makes your sub feel very vulnerable. We’re gonna show you how two different versions how you can make them.
Written Tutorial
Step 1: Lay your sub on his belly, then split your rope into two parts and wrap it around the subs arms behind his back. Make sure to leave a fingerwidth of space to not cut of blood flow or pinch nerves.
Step 2: Make the column tie. If you don’t know how, check out our first tutorial of this series.
Step 3: Wrap the rope in your hand. Make sure that the loose end, when you pull with your wrapped hand the column tie loop through this wrap now, is on the inside so it will stay thight.
Step 4: With (only part) of your loose rope, go through the loop of the strengthened column tie to make another loop. Then lead this new one around the still loose rope end and make a knot with this loop on top of the column tie one.
Step 5: Bend your subs knees. Then go with the loose rope around them, hook it into the loop from step 4 and go back around the knees again.
Step 6: Grip the 3 leg bindings(leave out the loose rope) with your hand. Lead your rope around your hand, over the bindings, then go underneath them. Grip it with your fingers of the hand holding the bindings, lead it in the spacing between the bindingsand pull it out with your free hand.
Step 7: Wrap the rope around the leg bindings a few times. Close it off with a knot. For that, do a wrap. Leave it loose. Then go with your rope through the spacing between bindings and wrap, before pulling on it and closing it.
Now come the 2 versions you could finish it with.
Version 1
Go with your rope up to the column tie. Hold your rope in place with your hand, and go around the bindings, and back to you through the space of the bindings and your rope that you lead up. Then go around your subs belly with it, and make a knot of your choosing to finish it up. This version leaves your sub secured thightly, and makes him almost unable to move.
Version 2
Leave out the rope around his belly, and instead follow the bindings around his hands and reinforce them, before closing everything of with a neat tie around the column tie. This will leave your sub more wiggle room, and potential later frustration cause while he could move, still can’t do much besides fall on his side if he’s careless 😉
Congratulations! You just made a successful Hogtie! Now you can either leave your sub securely storaged away or have some kinky fun with him 😉 Either way, we hoped you enjoy this tutorial and we’ll see you in the next one again.
This lecture has been presented by:
The Puppeteer
The model was:
Mr Cute Ass Piraat
Produced by:
se7en (KINKFINITY)
